Roche ACCU-CHEK Inform II Operator's Manual download pdf (Page 49)

Glucose Control Testing

Information stored during

glucose control testing

The following information is stored for every glucose con-

trol test using control solution:

■ Glucose control test result

■ Lot number of the control solution

■ Operator ID (if configured)

■ Level of control solution (L1 or L2)

■ Lot number of the test strips

■ Time and date of test

■ Comments (if present)

■ Out of range measurements

Control solutions For blood glucose test strips, control solutions have two

levels:

■ Level 1 (L1): Lo (low values in test results)

■ Level 2 (L2): Hi (high values in test results)

Preparing to run a glucose

control test

Aside from special preparations (see the following sec-

tion), a glucose control test is run in the same manner as

a patient test:

■ At least one code file for test strips must be stored

in the meter and match the lot number of the test

strips used (see Chapter 6).

■ The proper test strips must be available.

■ An operator ID must be entered (with password, if

applicable), if the meter is configured for login.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 159 160

No comments

Roche ACCU-CHEK Inform II Operator's Manual Page 49