Roche ACCU-CHEK Inform II Operator's Manual download pdf (Page 27)

Powering Up and Entering an Operator ID

2 Powering Up and Entering an Operator ID

Powering up the meter

1 Press and release the On/Off button . The meter

is now on.

2 The Power Up screen appears.

3 Check in the Power Up screen whether the date

(lower left) and time (upper right) are displayed

correctly. If necessary, refer to the instructions for

updating these settings in Chapter 9.

■ The battery icon shows the current battery level.

A completely filled icon indicates a fully

charged battery, and a partial charge is displayed

as a partially filled battery icon .

■ If during self-check an error is detected, the

appropriate error message appears on-screen.

■ If the QC Lockout feature is enabled and glucose

control is required, a corresponding message is

displayed.

Contrast

Power Up 12:48

03/16/10

Performing self-checks...

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 159 160

No comments

Roche ACCU-CHEK Inform II Operator's Manual Page 27